|
TES-46 CAT-5 Lan Cable Tester
|
 |
 |
- Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test
all category UTP cables and hardware.
- Verify end-to-end connectivity per EIA/TIA 568 wiring standard.
- Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair).
- Locates wiring/connection errors (distance to the open or shout)
- Measures cable length
- Easy to use only : One button to select the test and two lines characters LCD display.
- Low battery, Auto power off, long battery life (60 hours continuous)
|
 |
|
| Display |
Two lines characters LCD display (16 characters each) |
| Connector |
RJ45 and BNC |
| Category |
CAT5 |
| Faults Status |
Opens, Shorts, Reversed, Crossed, Split Pair. |
| Test Type |
TEST provides a pass / fail report on the cable under test. In
case a failure has been detected, the display offers additional
diagnostic information.
LENGTH provides the length of each pair (in case a twisted pair
cable is being tested).
WIRE MAP provides the detail wiring for the cable. |
| Cable Length |
Range 2 to 999 ft or 1.0 to 350 m.
Resolution 1 ft or 0.5 m.
Accuracy 5% + 3 ft or 5% + 1 m |
| Power |
6 pcs 1.5V size AAA alkaline battery. |
| Input Protection |
The inputs withstand telephone ringing and loop voltages. |
| Size / Weight |
152 mm x 72 mm x 35 mm / Approx. 360 g |
| Environment Conditions |
Operating : 0 ℃ to +50 ℃ , Storage : -20 ℃ to + 60 ℃ |
| Accessories |
Instruction manual , Carry case , One UTP Category 5 patch
cable, One RJ45F - RJ45F female coupler, Cable identifier #1 for the verification of the wire map. |
|
|
|
|
|
|
Product Image
|
